The sunn Forum
  • October 17, 2018, 06:12:31 pm
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


Welcome to the new home of The sunn Forum!

Author Topic: Concert Slave and a Model T  (Read 1225 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
Concert Slave and a Model T
« on: February 06, 2005, 11:02:57 pm »

Could I run a Concert Slave with my Model T? If so how would I hook them up together? I have a '74 Model T, a Matamp 4x12 (400 watts), and a Sunn 215S cab with 600 watt Carvin PS15C's in it. The cabs are wired to 16 ohms. I know I really don't need the slave, but I came across one that is dirt cheap and I was just curious about how it would sound and work with my other gear. Thanks.


  • Global Moderator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 729
Concert Slave and a Model T
« Reply #1 on: February 16, 2005, 02:33:02 pm »

You could run a concert slave with a model T - use the 600 ohm output
jack for input to the slave.  However, the concert slave will do best into
a 4 ohm speaker load.  Since they are separate outputs, the model T
could still drive a 16 ohm (I assume you change the impedance selector on the model T).