Author Topic: ATTN: Rich Briere...  (Read 2139 times)

0 Members and 1 Guest are viewing this topic.

Offline aaro)))n

  • Full Member
  • ***
  • Posts: 51
    • http://www.edgeofdoom.com
ATTN: Rich Briere...
« on: February 16, 2005, 02:57:27 am »
-- because you are the man, i bring this to your attention:

my sunn beta lead makes "crackeling noises", noticable durring cleaner parts in songs... if i hit the damn thing on top, it sounds ok for a few seconds until i start playing again (i used to see joe preston do this when his made weird noises when he played in the band, the whip). if i move my guitar cable from input to input or jiggle the cable, the sound changes and comes and goes...

-- question #1: do you know what is wrong?

-- question #2: does anyone fix sunn amps in seattle or in the NW?

-- thanx for reading, i am the "new guy"
AarO)))n Edge


personal site: www.edgeofdoom.com
doom band: www.grievousdoom.com
label: www.wormfodder.com
print design: www.odeum.org
web design: www.gluem.com

Offline protoz

  • Full Member
  • ***
  • Posts: 30
    • http://www.brutalrepublic.tk
ATTN: Rich Briere...
« Reply #1 on: February 16, 2005, 09:15:49 am »
I get the same thing on my Coliseum 300 so I took it to my local music center and they'll treat me right.  Your milage may vary on your music stores, but mine here in Iowa have never been anything but awesome to me and my band mates on equipment repairs and mods.

You may have bad/dirty inputs or pots.  You also may want to have your capacitors looked at.

You can look at those yourself and if they are bulging they need fixed ASAP

Offline aaro)))n

  • Full Member
  • ***
  • Posts: 51
    • http://www.edgeofdoom.com
ATTN: Rich Briere...
« Reply #2 on: February 16, 2005, 11:49:46 am »
-- hey, thanx for the response... last time i had trouble it was an output transister... this time it is different. thanx again!
AarO)))n Edge


personal site: www.edgeofdoom.com
doom band: www.grievousdoom.com
label: www.wormfodder.com
print design: www.odeum.org
web design: www.gluem.com

Offline Rich Briere

  • Sr. Member
  • ****
  • Posts: 103
    • http://www.richbriere.com
Aaron's Amp
« Reply #3 on: February 16, 2005, 04:01:26 pm »
Greetings Aaron,

I was in Metropolis and saw the SUNN logo shining in the night sky--I couldn't tell if it was a new code to call Batman to the scene but figured I'd best stop by.  :o

As always, I recommend taking any new / used amp to a qualified repair guy before using it. After a SUNN tube amp has gone through surgery, it's quite capable of moving small mountains.  

Enjoy, you've joined the ranks of the folks with the finest taste in musical gear.

Bass-ically Yours,
RB
MTD and Sunn...........life gets NO better than that.

Offline aaro)))n

  • Full Member
  • ***
  • Posts: 51
    • http://www.edgeofdoom.com
Re: Aaron's Amp
« Reply #4 on: February 16, 2005, 08:40:07 pm »
Quote from: Rich Briere
Greetings Aaron,

I was in Metropolis and saw the SUNN logo shining in the night sky--I couldn't tell if it was a new code to call Batman to the scene but figured I'd best stop by.  :o

As always, I recommend taking any new / used amp to a qualified repair guy before using it. After a SUNN tube amp has gone through surgery, it's quite capable of moving small mountains.  

Enjoy, you've joined the ranks of the folks with the finest taste in musical gear.

Bass-ically Yours,
RB



-- Thanx for stopping by, I know you are quite busy fighting crime, er... flagging sunn questions :)

-- I love sunn amps, can't wait to get this one running/rolling/raging again.
AarO)))n Edge


personal site: www.edgeofdoom.com
doom band: www.grievousdoom.com
label: www.wormfodder.com
print design: www.odeum.org
web design: www.gluem.com

Offline bentbolt

  • Full Member
  • ***
  • Posts: 60
ATTN: Rich Briere...
« Reply #5 on: February 17, 2005, 12:32:23 pm »
aaron,

there are loads of techs here in Seattle, I have found. Trading Musician has drop off service. Guitarville, Bass Northwest will know somebody, Solder Haus, etc. I've had T. Warren of VINTAGE TUBE AMP SERVICE work on some tube stuff for me, a very capable and knowledgeable tech.

Loads of options for you.

Hitting your amp on top is not one of them. HA HA hAH...
deru kugi wa utareru

Offline aaro)))n

  • Full Member
  • ***
  • Posts: 51
    • http://www.edgeofdoom.com
ATTN: Rich Briere...
« Reply #6 on: February 17, 2005, 06:55:46 pm »
Quote from: bentbolt
aaron,

there are loads of techs here in Seattle, I have found. Trading Musician has drop off service. Guitarville, Bass Northwest will know somebody, Solder Haus, etc. I've had T. Warren of VINTAGE TUBE AMP SERVICE work on some tube stuff for me, a very capable and knowledgeable tech.

Loads of options for you.

Hitting your amp on top is not one of them. HA HA hAH...


-- thanx for the input and ideas on repair places!

-- yeah, hitting the amp might be a quick fix and a release of frustration, but it never fixed any of my sunn amps before :)
AarO)))n Edge


personal site: www.edgeofdoom.com
doom band: www.grievousdoom.com
label: www.wormfodder.com
print design: www.odeum.org
web design: www.gluem.com

Offline baggman

  • Jr. Member
  • **
  • Posts: 20
Rich Briere...
« Reply #7 on: February 22, 2005, 08:56:16 am »
I would think that there would be more than a few competent techs in Jimi Hendrix' home town. :roll:  :roll:
Betabagg