Author Topic: help  (Read 1637 times)

0 Members and 1 Guest are viewing this topic.

Offline mr.sunn

  • Jr. Member
  • **
  • Posts: 13
help
« on: March 03, 2008, 08:55:24 am »
someone please tell what my sunn 2000s power transformer should read on a meter to tell me if its good

Offline loudthud

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,167
Re: help
« Reply #1 on: March 03, 2008, 10:40:53 am »
Ohm check with power off and power disconnected:

Primary connected for 120V: 0.9 ohm

HV secondary at GZ34 socket (pins 4 and 6) 17 ohms on one side and 18 ohms on the other.

Bias tap, 2.6 ohms to ground

Voltage check use Extreme Caution!

Line voltage 120.3 VAC

GZ34 socket (pins 4 and 6) 413 VAC to ground

Bias Tap 62.5 VAC to ground

Heater winding with power tubes removed: 6.52 VAC

Rectifier Heater GZ34 pins 2 to 8: 5.05 VAC

Offline basiklybass

  • Sr. Member
  • ****
  • Posts: 304
  • My Sunn's
    • The Old Days
Re: help
« Reply #2 on: March 07, 2008, 03:53:19 pm »
My voltages read a bit higher but in that range.