Info on Sunn SA10 Amplifier

[Ben Wales]

I have aquired two 150w duel channel Sunn Model SA10 Power amplifiers.
Would anyone have any information and manuals and if possible any drawing on these.

These were used for a Cinema 180 setup in the UK in the late 1980's.

[Don T.]

Hello:
  The SA series amps are pretty straight forward Push pull amps.There are no proprietary parts used so repairing them is a snap. With changing the transformer and filter caps they can produce 300watts per channel into 2ohms. Rock solid and reliable. I have schematics and bias adjust instructions for the 20-0166 power boards. If yours has 20-0135 boards then just go to the service manual area of this site and down load pages from the BETA series amp which used the same power board.
Don T.

[Ben Wales]

Thanks Don for this info.
I will check which board in the SA10 very shortly