The sunn Forum

Sunn Musical Equipment => Q & A => Topic started by: Beta Sunn on September 08, 2003, 09:16:12 am

Title: Wiring
Post by: Beta Sunn on September 08, 2003, 09:16:12 am

I have an Beta 202 enclosure . Speakers are Sunn Transducer 128G-SP . Impendance 8 ohms . Power rating 60 rms watts . System impendance 4 ohms . Max pwr. input 100 watts .There are two output jacks . One says parallel the other series . There is a third jack for input . There are no wires leading to it . Also input jack has three wire connectors . I'm not sure what the third connector is for . Each speaker is wired to output jack separately . How do I wire this the right way .

Title: Wiring
Post by: Anonymous on September 08, 2003, 11:31:18 pm

Hello;
 The input is supposed to be exactly that. If you are daisy chaining another cabinet you have the coice of it being in series or parrallel. Those last 2 jacks being outputs. The 3 conductor switching jack is how you achieve a series connection. I'm pretty sure I have a drawing around here someplace or I could draw one out and email it to you if you can't figure it out by the description.
Don T.