Author Topic: Concert Bass Mid control not working  (Read 1775 times)

0 Members and 1 Guest are viewing this topic.

Offline Hd0521

  • Jr. Member
  • **
  • Posts: 2
Concert Bass Mid control not working
« on: October 24, 2017, 10:40:32 pm »
With the mids dimed and the bass and treble at zero there is a very low volume tone coming through. If I back the mids down to zero the volume of that tone doesn’t change. If I dime either bass or treble the volume increases. I’m assuming it’s a passive Eq stack. I opened the amp up and it looks like the original pots wired right to the board. Any solution before having the pot replaced?

Offline _peter

  • Full Member
  • ***
  • Posts: 26
Re: Concert Bass Mid control not working
« Reply #1 on: October 25, 2017, 05:03:26 am »
Hi,

according to this schematic: https://schematicheaven.net/newamps/sunn_concertbass.pdf
the bass pot isn't stacked on the mids pot as in the usual fender/marshall tonestacks.
With bass at zero, the signal at the mids pot is shorted to ground. Therefor the mids pot can't work in this situation.

Cheers,
Peter