Author Topic: sunn 4x12 cabs  (Read 1785 times)

0 Members and 1 Guest are viewing this topic.

Offline acquittedfelon

  • Jr. Member
  • **
  • Posts: 5
sunn 4x12 cabs
« on: August 18, 2001, 03:20:00 pm »
i own a 73 model t..would it be ok to use the sunn reissue 4x12 (16 ohm) parallel with the older sunn 412L (8 ohm)? how could i use these cabs together? thanks

Offline Isaac

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,902
sunn 4x12 cabs
« Reply #1 on: September 02, 2001, 01:04:00 pm »
If you tried, the 8 ohm cabinet would suck up twice the power of the 16 ohm cabinet. Exactly what the effects would be depend on the frequency-dependent impedance and the sensitivity of the drivers.

You could try it, of course, but don't expect too much.

Now, if you want to trade your 8 ohm vintage 412 for my 16 ohm vintage 412, maybe we'd both be better off...

Isaac
Isaac

Offline Fred Cook

  • Full Member
  • ***
  • Posts: 93
sunn 4x12 cabs
« Reply #2 on: September 25, 2001, 07:57:00 pm »
Alternatively, shouldn't be too hard to rewire one of the cabs so that both were 16 or 8 ohms.
Savor the Sawgrass!
DiploStrat