The sunn Forum

Sunn Musical Equipment => Q & A => Topic started by: Gtr_tech on September 06, 2005, 10:07:26 am

Title: 100s filter caps
Post by: Gtr_tech on September 06, 2005, 10:07:26 am

Time to replace the B+ filters on my 100s (rev/trem, '69). Not going the multi-section route as the first section in the string will be either at or way too close to its V limit. Probably end up using a turret board on the top side of the chassis with a couple 350v caps in series for plate supply.

Anyone done this yet? How'd it turn out (appearance, stability)?

Title: 100s filter caps
Post by: Gtr_tech on September 06, 2005, 10:13:29 am

Naw.....scratch that....I just remembered about this.....
http://store.triodestore.com/sdslabcapboa.html

Unka Ned so rawks!

Title: 100s filter caps
Post by: lochry on September 08, 2005, 07:53:27 pm

Are you using the ST70 board?  Let us know how it turns out.  I'll be recapping a Solarus in a few weeks and would be interested in whether you find this to be a workwhile improvement.