The sunn Forum
Sunn Musical Equipment => DIY => Topic started by: Greg_M on February 15, 2011, 11:12:12 am
-
Major gut and retro on the 200S and now it is ready to see if I did it right.
I thought I would bring it up on a variac without tubes and see if anything sizzles.
Any suggestions or ideas?
-
So far so good.
Had it at 120v for about an hour and no stink, smoke or excessive heat. A very slight hum from somewhere.
No speakers plugged in
Guess I will try the tubes that came with it first.
A couple of Peavey 6550As
-
Success !
Found one pin that I had forgot to solder on the 6AN8. That kept me going for a couple hours.
Now for some nice new tubes.
Wahoo