The sunn Forum

Sunn Musical Equipment => DIY => Topic started by: rot gut on January 01, 2011, 02:25:41 pm

Title: 2000s/350b head back panel dimensions
Post by: rot gut on January 01, 2011, 02:25:41 pm

Can someone post the dimensions for the back panel of a 2000s/350b head?

Title: Re: 2000s/350b head back panel dimensions
Post by: rot gut on January 01, 2011, 02:43:28 pm

nvm.

Title: Re: 2000s/350b head back panel dimensions
Post by: Jeff Troy on January 03, 2011, 03:07:31 pm

Hey, RG,

Working up a non-scale but dimensional drawing for you now. Probably will post shortly.

Warmest...

Title: Re: 2000s/350b head back panel dimensions
Post by: Jeff Troy on January 03, 2011, 03:51:56 pm

Here ya go. This should do it for you.

If you send an e-mail address, I can send you an 8.5x11-inch page. The drawing will be much easier to read.

Tap to jefftroy@aol.com.

(http://i281.photobucket.com/albums/kk235/jefftroyimages/2000SAmpCaseBackPlate.jpg)

Warmest regards...

Title: Re: 2000s/350b head back panel dimensions
Post by: rot gut on January 03, 2011, 09:50:35 pm

email sent, thanks.

Title: Re: 2000s/350b head back panel dimensions
Post by: warandhairstyle on January 04, 2011, 09:27:27 am

email sent also.  Thanks!

Title: Re: 2000s/350b head back panel dimensions
Post by: CLD on June 20, 2011, 09:07:51 am

I sent one as well. Thanks in advance, Jeff.

Title: Re: 2000s/350b head back panel dimensions
Post by: CLD on July 19, 2011, 11:11:29 am

Does anyone have one of these diagrams they could send me? Thank you.

My main interest is the width (top to bottom) of the thin bar across the middle. My 2000S came with a DIY replacement that is too narrow (only 1.25"). Would someone with a 2000S measure that piece for me?

There was one post with a photograph large enough to see that indicates 2.125" for this piece - is that right? I saw 1.75" somewhere else, which is why I want to be sure. Thanks.

 :?

Title: Re: 2000s/350b head back panel dimensions
Post by: Walt-Dogg on July 19, 2011, 11:25:51 pm

That would explain the weird width of the DIY one if the previous also went by a diagram... I would go ahead and email Jeff though man, I'd trust him to get the dimensions right.

Title: Re: 2000s/350b head back panel dimensions
Post by: CLD on July 20, 2011, 09:52:45 am

I e-mailed and PMd Jeff last month but didn't get any response, hence the post yesterday. He's always been super-responsive before so maybe he's been traveling or something recently.

Title: Re: 2000s/350b head back panel dimensions
Post by: Jeff Troy on July 21, 2011, 09:05:23 pm

Hi, Guys,

CLD, I thought I sent that two you and another member awhile ago.

Please send an e-mail to jefftroy@aol.com and I'll resend the diagram.

Warmest regards,

Title: Re: 2000s/350b head back panel dimensions
Post by: CLD on July 22, 2011, 06:12:23 am

E-mail sent. Thanks, Jeff.

Title: Re: 2000s/350b head back panel dimensions
Post by: Jeff Troy on July 24, 2011, 06:51:01 am

Hi, Carter,

Sent dimensions yesterday. Did the attachment come through?

Warmest...

Title: Re: 2000s/350b head back panel dimensions
Post by: CLD on July 24, 2011, 07:29:06 pm

Yes, they did, thanks!  :-)