The sunn Forum
Sunn Musical Equipment => Q & A => Topic started by: matlabass on November 19, 2007, 09:01:55 am
-
Hi everybody
:?
I recent bought a Sunn betabass 115 in pretty good condition with the exception of the footswitch plug, that is missing. I found the footswitch shematic on this site but I desperately miss the amp shematic, in order to know who is going where. Somebody can help?? Thanks M.
-
I was kind of wondering about the connector myself. My amp had the connector with a number on it so I typed it into the search engine at Allied and Bingo! found the part.
http://www.alliedelec.com
The connector is sold by Tyco which purchased AMP (the connector company) some years ago I believe. You have to purchase the contacts sepatately. I have given the numbers for contacts designed for 24 to 20 gauge wire. The 512 numbers are the Allied stock numbers.
I have not ordered the parts and cannot verify that I have the correct numbers.
The BAD news: They sell contact insertion and extraction tools at almost $20 each. I don't know if these are really needed or not.
Square flange part for amp 512-1150 206061-1
Pins for above 512-1125 66103-3 (24-20)
Free hanging plug 512-1100 206060-1
sockets for above 512-0618 66105-3 (24-20)
Cable clamp 512-8609 206062-3
On the Beta Lead you have reverb. Does the footswitch for the Beta Lead have coax in it for the reverb?
-
The Beta Bass schematic is under "Beta Service Manual" (along with the lead schematics) or something of the sort in the Service Manuals section of the site. Its a jpg per page, so if you're on dialup it'll take a while.