« previous next »
Pages: [1]   Go Down

Author Topic: One 4 Ohm cabinet but two 8 Ohm Jacks on old 1200s  (Read 1657 times)

0 Members and 1 Guest are viewing this topic.

Offline bcomnes

  • Full Member
  • ***
  • Posts: 37
One 4 Ohm cabinet but two 8 Ohm Jacks on old 1200s
« on: September 10, 2001, 09:36:00 am »
Can I get anyone to comment on my old 1200S (the 4x6550 version)

There are two 8 ohm speaker jacks in the back and as far as I can figure, Jack one is 8 ohms and Jack 2 is for a second 8 Ohm cabinet and there is a switching jack that connects the 2 in parallel to the 4 ohm lead of the out put transformer.  Well I only have one 4 ohm cabinet, so my questions is can I put a dummy plug into Jack one and then my single 4 ohm cab into jack 2??  I really don't went to rewire the jacks.  Thanks!
Report to moderator   Logged
I enjoy old Sunn stuff, tube and solid state, I have a Concert Bass, Concert slave, 1200s (4X6550, dual rectifier) Concert PA, Studio PA, and an old Acoustic 360 2X15 cab but with Sunn Speakers)

Rock On!!

Offline George Snyder

  • Jr. Member
  • **
  • Posts: 16
One 4 Ohm cabinet but two 8 Ohm Jacks on old 1200s
« Reply #1 on: September 10, 2001, 02:16:00 pm »
Your right about the switching jack connecting to the 4 ohm tap. To use a 4 ohm cab just plug into the second jack (marked external speaker) and your set. No dummy plug is needed in jack one.
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »