« previous next »
Pages: [1]   Go Down

Author Topic: SUNN SR-4100 PA  (Read 23310 times)

0 Members and 3 Guests are viewing this topic.

Anonymous

  • Guest
SUNN SR-4100 PA
« on: February 27, 2002, 08:44:00 am »
Does anyone on this fine web site have any useful information or schematic on the Sunn SR-4100 PA powered mixer? My band inherited this and although it is currently works, it makes the occasional loud pops and crackles. None of the eq twisting seems to have any effect on the sound. We'd like to use this for garage rehearsals and are willing to have it gone over by a good tech if it is worthwhile. Thanks in advance for your thoughts.
Report to moderator   Logged

Offline Don T.

  • Sr. Member
  • ****
  • Posts: 488
SUNN SR-4100 PA
« Reply #1 on: March 01, 2002, 12:57:00 pm »
Hello:
 The SR units used the 20-0166 power board and there are schematics for these on this site. The pre amp section is pretty straight forward and easy to repair. Most problems come from bad connections at the switching jacks on the back panel.
Don T.
Report to moderator   Logged
Don T.

If it's too loud, you're too old.

Anonymous

  • Guest
SUNN SR-4100 PA
« Reply #2 on: March 04, 2002, 01:59:00 pm »
Thanks Don!
Report to moderator   Logged

Offline ricardormz

  • Jr. Member
  • **
  • Posts: 2
Re: SUNN SR-4100 PA
« Reply #3 on: April 18, 2016, 12:17:25 pm »
Does this mixer works as a studio mixer? I mean, does it has a passive stereo output I could send to a digital sound card?
« Last Edit: April 18, 2016, 12:26:53 pm by ricardormz »
Report to moderator   Logged

Offline loudthud

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,171
Re: SUNN SR-4100 PA
« Reply #4 on: April 18, 2016, 01:38:46 pm »
There is a line output, but it's not "stereo". It is a mono mixer.
Report to moderator   Logged

Offline ricardormz

  • Jr. Member
  • **
  • Posts: 2
Re: SUNN SR-4100 PA
« Reply #5 on: April 18, 2016, 01:44:12 pm »
Ok, thanks for the replay.
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »