Sunn PA speakers that I can't ID!!

[Mattius]

I have a set of PA cabinets that I can't find ANY info on.  They stand about 4 and a half feet tall.  They have 2 15" drivers.  The top driver has a solid dust-cap, and the bottom driver has a hole in the center of the dust-cap.  The horns are set above the drivers, and are powered by Magna 124 high-frequency drivers.  I'm not sure of the history of these cabinets, or what modifications they have.  On the back panel are two brass plates with 2 1/4" jacks on each.  The jacks are connected directly to the drivers/horn.  Mounted on the opposite side is a Sunn CN-2 Crossover network.  This has 3 jacks in a pyramid formation, and is labeled "In or Out."  I can make little sense of that, but I suppose that the CN-2 will be patched directly to the drivers for full range.  The cabinet is designed similar to the full range horn system on this page:
http://www.sunnamplifiers.com/catalogs/1979/1979catp3.jpg
but, it lacks the middle section with the 2 small round holes.  There is also porting on either side of the horn(which doesn't extend across the front entirely.)  Then entire thing appear to be made of 1" plywood.  Mounted on the top with some sizable bolts are plates with hooks (for hanging, winching up to a higher plane?) Any help would be GREATLY appreciated.

Matthew Pence
rocket24@bellsouth.net

[cahigg]

I don't think this will help much but the cabinets you describe sound a lot like the pair I just acquired.  Mine are labeled Magna 2301.  I've posted some pictures (as well as a message on this forum) at http://higginskids.com/sunn.html.  Take a look and let me know if they are similar.  I haven't taken the back off yet to check out the guts but the labels are all legible.  If you find any info on these, I'd appreciate it if you'd send me an email or reply to this post.  I'll do the same.  I haven't been able to find anything on the internet.

Thanks,
Chris

[Mattius]

The link you posted didn't work.  I apologize for my rather lengthy delay in responding, lightning is not a friend of my PC.  I found that the cabinets have been modified sufficiantly  The cabinet was not originally Bi-Amped.  The CN-2 has been re-wired to accomodate the bi-amping, however, it doesn't work.  I'm fairly certain that the entire cabinet is a Sunn cabinet, as all the drivers and the Crossover are Sunn components.

[Mattius]

Here's a picture of some speakers that are EXACTLY like mine, except for the small high frequency drivers under the main horn.

[Mattius]

http://higginskids.com/sunn.html

Sorry about the multiple posts, my brain is fried tonight.