« previous next »
Pages: [1]   Go Down

Author Topic: Help ! Need answer fast  (Read 2380 times)

0 Members and 1 Guest are viewing this topic.

Anonymous

  • Guest
Help ! Need answer fast
« on: July 26, 2003, 02:23:45 pm »
I have a Sunn Concert lead, mid 70's, and i opened up the amp one day and i didnt look at which posts the reverb wires were on. Now i cant figure out which wires go where. Please help. The is 3 post on the circuit board, and 3 wires coming from the reverb can. How do i hook it up. Thanks.
Report to moderator   Logged

Offline Bill Matthews

  • Full Member
  • ***
  • Posts: 89
Help ! Need answer fast
« Reply #1 on: July 26, 2003, 04:00:17 pm »
just put them on and try it, if it doesn't just switch the wires.  You won't do any harm.
Report to moderator   Logged
May ALL your days be SUNN-Y days

Offline Bill Matthews

  • Full Member
  • ***
  • Posts: 89
Help ! Need answer fast
« Reply #2 on: July 26, 2003, 04:00:46 pm »
just put them on and try it, if it doesn't just switch the wires.  You won't do any harm.
Report to moderator   Logged
May ALL your days be SUNN-Y days

Offline tube

  • Full Member
  • ***
  • Posts: 35
Help ! Need answer fast
« Reply #3 on: July 27, 2003, 04:10:43 pm »
i happen to have one on the bench!  :)

the short lead with the clear or white insulator is on the pin furthest to the rear of the circuit board (away from the front panel.) the longer lead from the reverb unit has a red and a black wire, the black goes to the pin closest to the front panel and the red goes to the middle pin.

hope that helps out.

best regards, tube
Report to moderator   Logged
best regards, tube

"i live in an alternate universe, but i have a summer home in reality."

Anonymous

  • Guest
Help ! Need answer fast
« Reply #4 on: July 28, 2003, 04:13:29 am »
The schematic has pin numbers if you don't wanna guess...
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »