« previous next »
Pages: [1]   Go Down

Author Topic: SunnSpot  (Read 3231 times)

0 Members and 1 Guest are viewing this topic.

Offline John

  • Full Member
  • ***
  • Posts: 53
SunnSpot
« on: December 04, 2000, 11:33:00 am »
I have a Sunnspot lighting controller. Does anyone have any information about this unit? Programing, Technical specs, etc.
Report to moderator   Logged

Offline Don T.

  • Sr. Member
  • ****
  • Posts: 488
SunnSpot
« Reply #1 on: December 04, 2000, 02:14:00 pm »
Hello:
  Which model controller do you have? There are schematics for power slaves (PS300/600) on this site. As for those controllers I can help you some but have no schematics. The Fender site should have schematics for the SC216 and SC24F which were in production at the time of the buy-out. Other than that they used a now standard mic cable to the slaves with a multiplex output repeated to 64 channels. 0 to 10 volts = off to full on.
Hope this helps.   Don T.
Report to moderator   Logged
Don T.

If it's too loud, you're too old.
Pages: [1]   Go Up
« previous next »