« previous next »
Pages: [1]   Go Down

Author Topic: 2000s w/out bass boost  (Read 2381 times)

0 Members and 1 Guest are viewing this topic.

Offline meltdown

  • Jr. Member
  • **
  • Posts: 20
2000s w/out bass boost
« on: June 05, 2006, 02:32:50 pm »
I have a 2000s that does not have the bass boost switch on the front panel.  Would that date this piece prior to 1969?  All other aspects look right other than an extra red 'on' light on the panel that was obviously added over next to the standby/polarity/on-off switches.  The unit works killer and I am just curious about how to date it.
Report to moderator   Logged
Sunn 2000S bass head with (2) 2x15 cabs with JBL speakers.  Fender Jazz bass Special is primary bass with a 61 Hofner Cavern Bass as backup.  Also have an Ampeg B-15n flip top amp as well.

Longmoor

  • Guest
Compare
« Reply #1 on: June 05, 2006, 02:42:40 pm »
My 2000s dosen't have the boost switch niether. The schematic differs from the build. build was 10/3/68 and my 1000s 7/22/69 which I can't find a schematic for...
Report to moderator   Logged

Offline loudthud

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,171
Re: 2000s w/out bass boost
« Reply #2 on: June 09, 2006, 10:54:37 am »
I have an old four knob 1200S that has no switch. I modified the tone stack to be like a 2000S. The cap going to the volume control was a 0.1uF and I just left it that way. It's like having the bass boost on all the time. The cap values used in the 2000S with bass boost give you a gentle bass rolloff in the normal position and flat response to about 40Hz in the boost position. I'm curious to know what cap was used in the 2000S w/out the boost switch.
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »