« previous next »
Pages: [1]   Go Down

Author Topic: MODEL T REPLACEMENT PARTS  (Read 3561 times)

0 Members and 1 Guest are viewing this topic.

Offline sunncity

  • Jr. Member
  • **
  • Posts: 10
MODEL T REPLACEMENT PARTS
« on: October 31, 2006, 02:24:01 pm »
DOES ANYONE KNOW WHERE I COULD FIND REPLACEMENT PARTS FOR MY MODEL-T REISSUE...THINGS LIKE TUBES ETC......

ALSO IF ONE TUBE DIES DO ALL 4 HAVE TO BE REPLACED?

THANKS
Report to moderator   Logged

Offline stanner

  • Sr. Member
  • ****
  • Posts: 437
    • s t a n o s a u r
Re: MODEL T REPLACEMENT PARTS
« Reply #1 on: November 01, 2006, 02:51:16 pm »
ALSO IF ONE TUBE DIES DO ALL 4 HAVE TO BE REPLACED?



as a matter of fact not only do you have to change all power tubes-you must change out all pre amp tubes-capacitors-transformers and any and all wires, screws and anything else in there :wink:

(ummm...of course NOT!)
s 8-)
Report to moderator   Logged
AMPSSOUNDBETTERLOUDER

Offline sunncity

  • Jr. Member
  • **
  • Posts: 10
Re: MODEL T REPLACEMENT PARTS
« Reply #2 on: November 02, 2006, 12:00:27 pm »
BUT WHERE WOULD I BUY ALL THE WIRES AND TUBES AND SWITCHES.....IF I RUN OUT OF SOLDER CAN I USE A HOT GLUE GUN?
Report to moderator   Logged

Offline Isaac

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,904
Re: MODEL T REPLACEMENT PARTS
« Reply #3 on: November 02, 2006, 01:42:55 pm »
This is a joke, right?
Report to moderator   Logged
Isaac

Offline JoeArthur

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 729
Re: MODEL T REPLACEMENT PARTS
« Reply #4 on: November 02, 2006, 04:23:11 pm »
Quote from: Isaac on November 02, 2006, 01:42:55 pm
This is a joke, right?

Obviously - why use a hot glue gun when contact cement or silicone rubber would work much better?
Report to moderator   Logged

Offline n!k

  • Full Member
  • ***
  • Posts: 74
  • N!
Re: MODEL T REPLACEMENT PARTS
« Reply #5 on: November 02, 2006, 07:11:17 pm »
I use chewed up bubble gum. Bazooka Joe for the power amp tubes and Wrigley's Spearmint for the Preamp tubes, obviously. Just stick the wad under the tube and smoosh into place.
Report to moderator   Logged
My Sunn Amp:
1971 "Coliseum" Model T (Prototype, Made in Portland)

Offline giovanni

  • Full Member
  • ***
  • Posts: 55
Re: MODEL T REPLACEMENT PARTS
« Reply #6 on: November 03, 2006, 11:35:35 am »
hahahahahahaha
Report to moderator   Logged

rick.heil

  • Guest
Re: MODEL T REPLACEMENT PARTS
« Reply #7 on: November 04, 2006, 12:24:42 am »
To answer the original question....

Any music supply store / catalog worth its salt has the tubes you would need.  Brand, new or NOS, and the like are purely personal preference.  Since I don't have a re-issue T, I can't tell you what I prefer anyways :)
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »