Sunn 3x12 cab...anyone have dimensions?

[monolith]

looking for dimensions of the 3x12 sunn cab? anyone that can hook me up with some basic measurements? thanks!

[made by hand]

monolith.. checked my 72 catalog and found your 312s cab in there...i don't know if they offered it in 71..don't have that cat yet...well..anyways...the cab measurement was 42 and a half tall..24 wide and 15 inches deep...now ..i don't know if the 42 and a half tall is WITH or WITHOUT THE WHEELS... the old catalogs included the wheels in their cab height...now...the catalog i was looking at gave the 115s cab as 24inches square which is right..sooo. i really don't know if the wheel height is included in there or not....it's almost like the 200s cab but that's not doing you anygood as far as the deminsions go...i'am sure there is a sunn brother on the site that can give you the numbers as far as the height is concerned....the 610s and the 215s all shared the same cab size....hope this post helps a little...as a post sript....the 75 catalog showed the same size cbas with out the wheels in the pictures...they also offered a 612s...i'am guessing that the 42 and a half tall is without the wheels..have funn in the SUNN...smiles   Bob from mass.....

[Isaac]

Sunn used only a few basic cabinets. The workhorse was the 200S cabinet, which was adapted to many internal configurations. Two 15"s, four 12"s, and one 15" and a horn in the 60's, then later six 10"s, six 12"s, three 12"s, and a different take on two 15"s. All had the same outer dimensions: 40" high (42" with casters), 24" wide, 15" deep. If the 1972 catalog listed it at 42.5" tall, I think they must have gone to slightly larger casters.