« previous next »
Pages: [1]   Go Down

Author Topic: Tube Layout for 1000S needed  (Read 2620 times)

0 Members and 1 Guest are viewing this topic.

Offline marumela

  • Jr. Member
  • **
  • Posts: 3
Tube Layout for 1000S needed
« on: September 18, 2009, 02:15:25 pm »
Seeing all those models is there anyone who has a diagram of tube placement for a 1000s. It was given to me and I use it as an amp for a 350watt leslie, made for a conn organ. It has seven knobs, four imputs 2 hi 2 low. Volume, treble, bass, contour. Rate gain  reverb Does anyone know how many watts it has? I have all the tubes for it but removed them for replacement and discovered there is no schematic or guide to replace tubes in proper order. I really would apreicate your help.

                                                   Thanks in advance

Report to moderator   Logged

Offline loudthud

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,171
Re: Tube Layout for 1000S needed
« Reply #1 on: September 18, 2009, 03:28:43 pm »
The 1000S was rated at 120 watts RMS. Your amp appears to have been modified because it has an extra tube.
« Last Edit: September 18, 2009, 03:39:26 pm by loudthud »
Report to moderator   Logged

Offline marumela

  • Jr. Member
  • **
  • Posts: 3
Re: Tube Layout for 1000S needed
« Reply #2 on: September 21, 2009, 01:07:21 pm »
Thanks, I hope this solves the problem.
Report to moderator   Logged

Offline retrorod

  • Jr. Member
  • **
  • Posts: 13
Re: Tube Layout for 1000S needed
« Reply #3 on: September 29, 2009, 04:01:35 pm »
Hello, I'm working on the same model amp. Mine has the three pree-amp tubes as in the shcematic. What tube is in your 4th socket, just out of curiosity? Would it be possible for you to send pics of the inside of the chassis? What is the born on date on your amp? Thanks if you can give me more info...Rod
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »