« previous next »
Pages: [1]   Go Down

Author Topic: Model T Build  (Read 6067 times)

0 Members and 1 Guest are viewing this topic.

Offline hijdra

  • Jr. Member
  • **
  • Posts: 3
  • sank you doctor
Model T Build
« on: July 07, 2010, 12:23:26 pm »
Outside of Verellen, has anyone successfully cloned a Model T? (first gen).
From my understanding the main problem is a lack of iron. Followed by incomplete schematics.

Has anyone found transformers that work?
Report to moderator   Logged
coliseum 300
68 sonic I

Offline tboy

  • Administrator
  • Full Member
  • *****
  • Posts: 27
    • AMPAGE
Re: Model T Build
« Reply #1 on: July 07, 2010, 04:37:07 pm »
Quote from: hijdra on July 07, 2010, 12:23:26 pm
Followed by incomplete schematics.

What's missing from the schematics?
Report to moderator   Logged
-tb

Offline hijdra

  • Jr. Member
  • **
  • Posts: 3
  • sank you doctor
Re: Model T Build
« Reply #2 on: July 08, 2010, 11:07:16 pm »
My mistake, I had read somewhere that they were.

Anyways, for transformers, Mercury Magnetics is now selling these http://www.mercurymagnetics.com/pages/catalog/manufacturers/MM_sunn.htm
but they're pretty pricey, has anyone had any luck with the hammond 1650T?
Report to moderator   Logged
coliseum 300
68 sonic I

Offline loudthud

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,171
Re: Model T Build
« Reply #3 on: July 09, 2010, 09:37:51 am »
The 1650T works fine as an OT for Bass amp service. I never really tried it for guitar. You have to wire it up for just 4 and 8 ohm outputs. The Model T takes the feedback from the 16 ohm tap which is not available when the output windings are set to 8/4. Hammond has expanded their line in recent years so there may be another option.
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »