Author Topic: Comcert Controller 1  (Read 2586 times)

0 Members and 1 Guest are viewing this topic.

Offline shibbz

  • Full Member
  • ***
  • Posts: 59
Comcert Controller 1
« on: March 31, 2011, 03:45:58 pm »
The concert controller has 4 speaker outs, that appear as 2 pairs, and a 4 ohm minimum with 150 watt output.
Does this mean that each pair has a 4 ohm minimum and 150 watts for each side? Here's a picture for reference.


Offline mckinnon audio

  • Sr. Member
  • ****
  • Posts: 404
Re: Comcert Controller 1
« Reply #1 on: March 31, 2011, 04:46:38 pm »
  Hi there,the amp is a mono amp,all 4 outputs are in parallel.Back in the day it was common for speaker "columns" to be 16 ohms,and a lot of other cabs too,so you could run 4 cabs/columns off of the head which gives you a 4 ohm load.Also the main EQ is a cut only,you can't boost any freq.'s with it.Good luck,Mel.