« previous next »
Pages: [1]   Go Down

Author Topic: Sunn SX6350 Schematic  (Read 3665 times)

0 Members and 5 Guests are viewing this topic.

Offline rtnet

  • Jr. Member
  • **
  • Posts: 3
Sunn SX6350 Schematic
« on: October 28, 2001, 11:02:00 pm »
 I have a Sunn Sx-6350 that I have been working on for months. Replaced all the outputs,drivers,transistors on board,power caps and a bunch of other stuff. Power supply works fine. Can power up with the old light bulb trick and everything works fine, but as soon as I plug it in the wall it frys the internal fuses. Somthig on the board is allowing to much current to flow but I can't find it. HELP
Report to moderator   Logged

Offline Don T

  • Full Member
  • ***
  • Posts: 72
Sunn SX6350 Schematic
« Reply #1 on: October 29, 2001, 10:02:00 pm »
Hello:
 Unfortunately I do not have a Schematic for the SX series BUT........ If indeed you have replaced all them parts then I would be checking the diodes that shunt the + - power supplies next. Make sure that when powered up through the light bulb that you have the + - 15v supply as well as the main + - 70v (approx) suppies.
Don T.
Report to moderator   Logged
It's the ear not the gear.
Pages: [1]   Go Up
« previous next »