« previous next »
Pages: [1]   Go Down

Author Topic: Beta Bass needs a little love  (Read 2141 times)

0 Members and 4 Guests are viewing this topic.

Offline Ed davis

  • Jr. Member
  • **
  • Posts: 7
Beta Bass needs a little love
« on: June 24, 2003, 07:18:23 am »
I have a Beta Bass with one sick channel. The other channel is fine. The mix pot is ok only when the top channel's knobs are on zero. The top channel makes a high pitch feedback noise. Why? The bottom channel is fine. I love my Beta so any help would be great.



thanks Ed Davis
Report to moderator   Logged

Offline Don T.

  • Sr. Member
  • ****
  • Posts: 488
Beta Bass needs a little love
« Reply #1 on: June 28, 2003, 11:19:12 am »
Hello:
 Sounds like capacitor failure or broken solder joints. Feed back is probably excessive gain or an oscillation. Best  chance would be to remove the pre-amp board and do a real close observation with a magnifying glass to check for any broken solder joints. If no joy then I can help you with some "backyard" diagnostic methods.
Report to moderator   Logged
Don T.

If it's too loud, you're too old.
Pages: [1]   Go Up
« previous next »