Author Topic: concert lead footswitch info. and repair  (Read 2719 times)

0 Members and 3 Guests are viewing this topic.

electicmage

  • Guest
concert lead footswitch info. and repair
« on: January 15, 2005, 08:07:17 pm »
I recently aquired a sunn concert lead. Should be late 70's. Black and Silver w/ Red treble swtiches. I am looking for the footswitch. Will pay top dollar. Will any other footswitch work? I have seen no info on this board about this. How much would it cost to have one built? I have the schematics but that was all I got from fender CS. Anyone with experience in area would be appreciated. If not, I might just get rid of the thing. It was either this, or shelling out for a JCM. I love the clean sound but I want channel distortion. Not fx pedal bullshit. I also need the knobs but i replaced with fenders and hey work, but don't line up. The disortion channel cuts in and out on Brite and does not really work on the normal jack. Is this normal for sunn? Great amp just small problems.

Offline Isaac

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,904
concert lead footswitch info. and repair
« Reply #1 on: January 16, 2005, 06:01:54 pm »
Problems of any kind are not normal for Sunn. If I could take a look at it, I could probably find the problem pretty quickly. However, I'm in the wilds of Oregon, so you're on your own!
Isaac

Offline Don T.

  • Sr. Member
  • ****
  • Posts: 488
concert lead footswitch info. and repair
« Reply #2 on: January 19, 2005, 05:42:46 pm »
Hello:
 I have a NOS Sunn concert foot switch I'll sell. Which connector does your unit have? My pedal has a blue 7 pin male. In the original box complete with return address.
Don T.

If it's too loud, you're too old.

electricmage

  • Guest
concert lead footswitch info. and repair
« Reply #3 on: January 20, 2005, 03:45:42 am »
My Concert lead has two rca jacks/effect. Two for the distort and two for reverb. Is this what you needed to know?

Offline Don T.

  • Sr. Member
  • ****
  • Posts: 488
concert lead footswitch info. and repair
« Reply #4 on: January 20, 2005, 10:34:39 pm »
Hello:
 Unfortunately, this pedal will not work with your unit. Sorry
Don T.

If it's too loud, you're too old.