« previous next »
Pages: [1]   Go Down

Author Topic: which ohm selection to use?  (Read 2352 times)

0 Members and 1 Guest are viewing this topic.

Anonymous

  • Guest
which ohm selection to use?
« on: January 30, 2005, 09:45:43 pm »
hi all,
I have a fender made sunn model T.  on the back it has two jacks. one for the main speaker and one for the external.  then it has an ohm selector 4, 8, or 16 ohms.  I have two marshall 1960 model stereo cabs.  If I set each cab to mono and plug the cable in the 16 ohm side on each cab, then do I set the amp to 8 or 16 ohms?  thanks.
Report to moderator   Logged

Offline Colossus76

  • Full Member
  • ***
  • Posts: 75
    • Buzzardstein
ohms
« Reply #1 on: January 30, 2005, 10:08:46 pm »
two 16 ohm cabs ran in parallel will be an 8 ohm load. I have a '74 Model T and i run two 16 ohm cabs, I set my amp to 8 ohms.
Report to moderator   Logged

Anonymous

  • Guest
which ohm selection to use?
« Reply #2 on: January 30, 2005, 10:32:27 pm »
thanks!
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »