« previous next »
Pages: [1]   Go Down

Author Topic: 2000s head and cab.  (Read 4662 times)

0 Members and 1 Guest are viewing this topic.

Offline fatlizzard

  • Sr. Member
  • ****
  • Posts: 135
2000s head and cab.
« on: June 03, 2006, 08:48:52 pm »
Anyone seen the 2000S on e-bay?
 
http://cgi.ebay.com/SUNN-2000s-AMP-2-15-JBL-D-140F-CABINET-NO-RESERVE_W0QQitemZ7420247367QQihZ016QQcategoryZ121159QQrdZ1QQcmdZViewItem  

If I win the lotto tonight!!!!!!!
How much to ship a 300 pound amp?
Report to moderator   Logged

Offline AdmiralB

  • Full Member
  • ***
  • Posts: 67
2000s head and cab.
« Reply #1 on: June 03, 2006, 08:59:47 pm »
The PT is not correct - it's a 200S PT (probably the Triode clone).  I emailed the guy and he swears it's correct, but it is obviously not.  A 2000S PT is about three times that size.  You can see the old mounting holes in one pic, and where they offset the PT to the right - the feedthrough into the chassis is way exposed to the left.

And why is there an external choke?  It looks like the right part, but there should be two of them and they should be internal.  

He says in the auction it was stripped when he got it; it looks to me like it was assembled by someone who didn't know a whole lot about Sunns, or maybe even amps in general since it appears to be running four 6550s off a PT designed to run two.  If there were some gut shots it would be easier to tell.
Report to moderator   Logged

Offline fatlizzard

  • Sr. Member
  • ****
  • Posts: 135
trans replacement
« Reply #2 on: June 04, 2006, 09:05:36 am »
does triode or anyone else make a replacement trans. that will work in this amp? I just checked and it looks like he ended the auction early!
I would still love to have the cab. ,I see 2000S heads on e-bay fairly often but rarley see a 2000 cab.
I just picked up a Sonic 1-40 or 1-40/C60 cab. last week I'm not sure wich it is, it's 24"x24"x15" and has a D140 and is dated 1968, I found it in a local paper for $150
Report to moderator   Logged

Offline AdmiralB

  • Full Member
  • ***
  • Posts: 67
2000s head and cab.
« Reply #3 on: June 04, 2006, 09:17:56 am »
He and I have been emailing.  I made a strong enough case (I sent him pics of my 2000S PT, along with a 200S) that he suspects things aren't kosher and he's going back to the techs that put it together.  He seems like a good guy, he just doesn't know much about amps.

He pulled the auction until he gets it straightened out.  I told him he should split; he'd get $800 or more for that cab, I bet, there are lots of 2000S heads out there by comparison.  The amp might bring $750, or it might bring $350, you never know about that, but he'll do better splitting.

Nobody makes a PT for that except maybe Mercury, and that would cost you several internal organs.  You might find one on eBay now and then, the Dynaco Mark VI is I think the hifi equivalent.
Report to moderator   Logged

Offline fatlizzard

  • Sr. Member
  • ****
  • Posts: 135
2000s head and cab.
« Reply #4 on: June 04, 2006, 09:30:26 am »
I think I have only seen one other 2000S cab on e-bay!!!
Do you know if the cab I picked up would be a Sonic 1-40 or 1-40/C60 ?
It's half of a 200S cab.
Thanks!!!
Report to moderator   Logged

Offline MickP

  • Full Member
  • ***
  • Posts: 22
24X24x15 cab
« Reply #5 on: June 04, 2006, 09:13:49 pm »
Sunn also used the  1-15 cabs (24X24X15) and called them
200S Compact enclosures. Offered  as the 200S head w/ 1 cab or 2
cabs stackable like Coliseum cabs. They were offered with a
Sunn Transducer w/options of a 15'' Vega, or a JBL D-140F.
I have these shown in a SUNN Product Guide copyright 1970, but
have never seen one.
MickP
Report to moderator   Logged

Offline fatlizzard

  • Sr. Member
  • ****
  • Posts: 135
24x24x15 cab.
« Reply #6 on: June 04, 2006, 10:27:24 pm »
This cab. is dated 1969 inside,the D140 appears to be original,the guy I bought it from said it had a J.B.L. recone done at Orange County Speaker Works about 2 years ago, Wish I had another to stack it with!!!!!
Report to moderator   Logged

Offline largeal

  • Jr. Member
  • **
  • Posts: 7
Re: 2000s head and cab.
« Reply #7 on: June 11, 2006, 12:14:27 am »
Quote from: AdmiralB on June 03, 2006, 08:59:47 pm
The PT is not correct - it's a 200S PT (probably the Triode clone).  I emailed the guy and he swears it's correct, but it is obviously not.  A 2000S PT is about three times that size.  You can see the old mounting holes in one pic, and where they offset the PT to the right - the feedthrough into the chassis is way exposed to the left.

admiral B....are you confusing the Power transformer with the Output Tranny? - i understood the POWER TRANNY is the Larger tranny on the RIGHT when looking at the BACK of a 2000S - isn't it always the larger of the 2 transformers? i presume your comments are referring to the OUTPUT tranny on that 2000s amp that was ebay. :?
Report to moderator   Logged

Offline AdmiralB

  • Full Member
  • ***
  • Posts: 67
Re: 2000s head and cab.
« Reply #8 on: June 12, 2006, 06:43:31 am »
No, looking in from the back, on Sunns the OT is on the right - above the speaker jacks (makes sense, eh?).  The larger-is-PT is *generally* true but not for Sunns - the 60W and 120W amps have OTs that are significantly larger than the PTs.
Report to moderator   Logged

Offline Mike B.

  • Full Member
  • ***
  • Posts: 75
Re: 2000s head and cab.
« Reply #9 on: June 13, 2006, 08:42:47 am »
I saw this cabinet on "the Bay" the other day and thought about going for it. I e-mailed the guy and he seems pretty straight forward. I'm wondering if this cab would sound good with that nice Coliseum Bass amp I just picked up this morning.

By the way, it's great to have a nice Sunn amp forum! :-)

Mike
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »