Author Topic: using the outputs on a model t (Read 2930 times)

o))) · « **on:** November 28, 2006, 04:37:57 pm »

hello everyone, how can i use the outputs on the front of the model t? i was told i could run another amp from there(brite or normal). is this okay? thanks

rick.heil · « **Reply #1 on:** November 29, 2006, 07:05:07 am »

Yep. More than OK, that's what the outputs are there for

JoeArthur · « **Reply #2 on:** November 29, 2006, 07:56:09 am »

The outputs just split your guitar signal, so don't expect to be able to control the other amp with the brite or normal volume controls.

o))) · « **Reply #3 on:** November 29, 2006, 08:47:54 am »

would having the model t set at 16 ohms and the other say 4 ohms be okay? thanks for your help

Isaac · « **Reply #4 on:** November 30, 2006, 08:32:52 am »

Set the output impedance to match whatever cabinet(s) you're running from that amp, and you'll be fine.

o))) · « **Reply #5 on:** December 01, 2006, 04:59:35 pm »

thanks isaac

The sunn Forum

News:

Author Topic: using the outputs on a model t (Read 2930 times)

o)))

using the outputs on a model t

rick.heil

Re: using the outputs on a model t

JoeArthur

Re: using the outputs on a model t

o)))

Re: using the outputs on a model t

Isaac

Re: using the outputs on a model t

o)))

Re: using the outputs on a model t