What is the Ohm rating for the Sonic 2

[EdBass]

Here's the pictures I promised. The 2000S pictured looks like it has been modified from the original 16/8 to an 8/4 configuration. The output transformer has cloth covered wires and it's a little hard to tell white from yellow. Also note on the Sceptre how the brown 4 ohm wire goes to an unused terminal on the terminal strip.

Those might be the newest looking 40 yr old amps I've ever seen. Just beautiful!

[loudthud]

Those pictures turned out well because I used the flash. You can see the rust in the Sceptre photo on the bottom edge. I was wondering if I should try to sand the rust off or use Navel Jelly. The plating on those old chassis' didn't really protect very well and the transformers also tend to rust.