« previous next »
Pages: [1]   Go Down

Author Topic: Fixing Up The 200S Amp  (Read 5844 times)

0 Members and 1 Guest are viewing this topic.

Offline Greg_M

  • Sr. Member
  • ****
  • Posts: 198
Fixing Up The 200S Amp
« on: February 14, 2011, 03:11:59 pm »
I've been working on the 200S amp I got off ebay and thought I'd post a couple of pictures

The feet were broke off the output xfmr so I had to make some new ones. I couldn't find anyone that had a blown xfmr to swipe the feet off.
I'm betting these won't break




The power xfmr was toast so I bought a new one of those.
New caps, tube sockets, pots, bias pot, big cap, power cord, painted the chassis. Still looking for some decent knobs.
Put the VOM on the output xfmr and it looks good, but we'll see.

I wish it would warm up so I could go work in the garage again and finish the speaker enclosure




It was pretty crusty when I got it.







Report to moderator   Logged

Offline rot gut

  • Sr. Member
  • ****
  • Posts: 135
Re: Fixing Up The 200S Amp
« Reply #1 on: February 14, 2011, 03:18:55 pm »
very nice looking.
Report to moderator   Logged

Offline Oli

  • Sr. Member
  • ****
  • Posts: 257
  • FEED YOUR HEAD!
Re: Fixing Up The 200S Amp
« Reply #2 on: February 22, 2011, 02:37:03 am »
Wow, looks even better than new! :-D
Report to moderator   Logged
SUNN Sorado - 1969 / SUNN 2000S - 1970 / SUNN Sorado  - 1971 / SUNN 350B - 1973 / SUNN Coliseum 880 - 1973 / SUNN Concert Bass - 1972 / SUNN Concert Bass - 1979 / 2x SUNN 215B - 1970/75 / SUNN/SAD 2000S cab

Offline Baddog

  • Full Member
  • ***
  • Posts: 25
Re: Fixing Up The 200S Amp
« Reply #3 on: April 17, 2011, 07:08:35 pm »
Very nice work A++++
Report to moderator   Logged

Offline Johnny Guitar

  • Sr. Member
  • ****
  • Posts: 105
Re: Fixing Up The 200S Amp
« Reply #4 on: April 17, 2011, 10:43:06 pm »
Hello Greg,
Amp looks great and I know its been done for awhile so I hope you are enjoying it.  Could you please tell me what kind of paint you used on the chassis and did you paint the transformer?  Did you make the transformer feet, I know I'm not the only one that could use a few.  Do you have a parts list you could share?  I'm going to be fixing up my 1967 200S soon.  Any luck on finding pointer knobs yet?
Thanks,
Johnny G
Report to moderator   Logged

Offline Jeff Troy

  • Sr. Member
  • ****
  • Posts: 150
Re: Fixing Up The 200S Amp
« Reply #5 on: April 18, 2011, 10:28:31 am »
Hi, Greg,

Impressive. Your chassis looks really clean, and the faceplate is almost beyond believable.

Did the faceplate actually come to you in that condition, or do you have some kind of resto process for killing the scratches and dents, and refinishing the silkscreen graphics over the aluminum?

Thanks, and congrats on a first-class job.
Report to moderator   Logged
759 New Holland Ave.
Lancaster PA 17602
C: 717-917-3670
www.bandmix.com/jefftroy
www.jefftroy.com (under construction)

Offline ROCKETBRO2

  • Full Member
  • ***
  • Posts: 68
Re: Fixing Up The 200S Amp
« Reply #6 on: April 19, 2011, 04:08:32 pm »
Hi Greg, the weather here in Burlington is great for working in the shop.Sunny, 59 and hailing! Ha!
Report to moderator   Logged
73 CONCERT BASS,215 ORION

Offline Walt-Dogg

  • Hero Member
  • *****
  • Posts: 567
Re: Fixing Up The 200S Amp
« Reply #7 on: April 19, 2011, 05:28:09 pm »
Quote from: ROCKETBRO2 on April 19, 2011, 04:08:32 pm
Hi Greg, the weather here in Burlington is great for working in the shop.Sunny, 59 and hailing! Ha!
The weather yesterday was GREAT for working on it here, 60, pouring rain, high humidity and an earthquake.
Report to moderator   Logged
Gibson Les Paul Special
Electra X260
Squier Precision Bass MIJ
Science Hellhawk 100w
Ampeg VT-22/V-4
Science Mother
Mojotone Bluesbreaker 2x12
Mojotone British 4x12
Ampeg SVT 810

Offline Johnny Guitar

  • Sr. Member
  • ****
  • Posts: 105
Re: Fixing Up The 200S Amp
« Reply #8 on: May 16, 2011, 08:43:39 pm »
Quote from: Johnny Guitar on April 17, 2011, 10:43:06 pm
Hello Greg,
Amp looks great and I know its been done for awhile so I hope you are enjoying it.  Could you please tell me what kind of paint you used on the chassis and did you paint the transformer?  Did you make the transformer feet, I know I'm not the only one that could use a few.  Do you have a parts list you could share?  I'm going to be fixing up my 1967 200S soon.  Any luck on finding pointer knobs yet?
Thanks,
Johnny G

Hello Greg,  Are you out there?
Report to moderator   Logged

Offline jaywalker

  • Full Member
  • ***
  • Posts: 72
Re: Fixing Up The 200S Amp
« Reply #9 on: July 18, 2011, 09:09:59 pm »
Very nice resto. It appears to be a hammertone silver/gray (or grey if you prefer) on the chassis. I really dig the hammertone colors...blue and gray being common, green somewhat rare. It was popular in the 50's and early 60's on machinery and safe doors along with wrinkle tone paints that hid imperfections but are harder to keep clean..
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »