« previous next »
Pages: [1]   Go Down

Author Topic: HELP from other Sunn 300t owners NEEDED!  (Read 4253 times)

0 Members and 1 Guest are viewing this topic.

Offline johnson

  • Jr. Member
  • **
  • Posts: 5
HELP from other Sunn 300t owners NEEDED!
« on: November 26, 2014, 01:23:29 pm »
I have some questions about setting up my 300t.

I run two 4X10 8ohm cabinets with my 300t. I have been running one output to each cabinet with my speaker impedance switch set to 4ohms. The guy that works on my amps told me that I should run it with the impedance switch set at 4ohms.

My question is, should I run the head with the impedance switch set at 4ohms or 8ohms for the setup described above?

Thanks for the help!

Report to moderator   Logged

Offline EdBass

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,914
Re: HELP from other Sunn 300t owners NEEDED!
« Reply #1 on: November 26, 2014, 08:21:57 pm »
If the 410's are each 8 ohm boxes, you want the impedance switch on 4 ohms. Attached is a PDF copy of the 300T owners manual, it comes in handy for questions like these!
Report to moderator   Logged

Offline EdBass

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,914
Re: HELP from other Sunn 300t owners NEEDED!
« Reply #2 on: November 27, 2014, 08:36:28 am »
Now I've got a question for YOU.

Didn't you ask this same exact question, and get the same answer on this forum more than 4 years ago?

http://sunnforum.ampage.org/index.php/topic,5174.msg20388.html#msg20388

I'm just curious, one would imagine that you would have it figured out in the 8 years you've owned it... ;)

http://sunnforum.ampage.org/index.php/topic,4200.msg15544.html#msg15544
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »