« previous next »
Pages: [1]   Go Down

Author Topic: Coliseum 880 question  (Read 2337 times)

0 Members and 1 Guest are viewing this topic.

Offline DaveFame

  • Jr. Member
  • **
  • Posts: 4
Coliseum 880 question
« on: August 10, 2006, 01:10:43 pm »
Can I run the 880 through an SVT 410 and SVT 115 classic cabs stacked?

Both cabs are 8 ohms

Thanks
Report to moderator   Logged

rick.heil

  • Guest
Re: Coliseum 880 question
« Reply #1 on: August 10, 2006, 01:37:54 pm »
Depends how you connect them.  In parallel it would make 4 ohms, which I would imagine is stable for the amp.  Not so sure about 16 ohms, maybe try to find someone with a manual or a schematic to tell you?  I'd run it at 4 if I were you until I was sure the amp is stable at 16 ohms.
Report to moderator   Logged

Offline Isaac

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,904
Re: Coliseum 880 question
« Reply #2 on: August 26, 2006, 06:11:07 pm »
I can't imagine why it wouldn't be. Higher impedances are rarely, if ever, a problem for solid state amps. It would reduce the power considerably, though. Still, why run series? The Coliseum amps are good down to 2 ohms, so 4 would be fine.
Report to moderator   Logged
Isaac

rick.heil

  • Guest
Re: Coliseum 880 question
« Reply #3 on: August 26, 2006, 06:58:32 pm »
Thanks, Isaac; I wasn't sure if they were rated down to 2 ohms (although it is a bass amp, and most are rated down that low anyways I guess).  Just didn't want a blown amp on my soul when I meet my maker  :-o
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »