Blown transformer

[astralhands]

I have a Sunn Coliseum 880 with a blown transformer. Is there anything I can do to fix it, or is it a lost cause? Any help would be appreciated.

[mckinnon audio]

  Hi there,unless you have some experiance re-winding motors or transformers,I'd say you should pass on repairing it yourself.Look for another head,(blown up,or in worse shape than the 880),for a similar trans.I think the one in the Collisum lead and bass is the same as the 880,(correct me if I'm wrong).Or try a reputable motor re-wind shop,they might be of some help.There are some shops that specialize in vintage transformer re-winds,hope this helps,good luck Mel.

[DaveFame]

Does anyone have a link to a sight that may provide refurb transformers or for a company that makes new ones for older solid state Sunn heads?

Thanks 

[fatlizzard]

Try This site!!!!!!!!!!!!

http://store.triodestore.com/dytr.html

[EdBass]

Triode pretty much only has what they show on the sight. if you need Dynaco based Sunn parts (except Mk VI/2000S Output trannies ), give them a call.
For that Coliseum, this may be a better bet;
http://www.mercurymagnetics.com/index2.htm
Mercury Vintage will restore/repair anything you need.

[DaveFame]

Hey EdBass thanks for the link.  Mercury does not carry the PT for the 880, but they will unwind the old one, re-wind and upgrage the one that I have.  They were quick to resond and very helpful.  They will charge me $200 for the PT.  I'll report back when the work is done and let eveyone know how it turns out.