Author Topic: sunn model T reissue  (Read 2530 times)

0 Members and 4 Guests are viewing this topic.

Offline django7866

  • Sr. Member
  • ****
  • Posts: 114
    • gatedoom
sunn model T reissue
« on: February 13, 2009, 08:25:08 am »
 I am new to this forum, but much like all of you I too am a SUNN fan. I recently bought a SUNN Model T reissue and noticed when I go from the clean channel to the gain channel it is considerably quieter. I have heard that some amps have a limiter that will do this. Is this true and if so is there any way I could remove this with out damaging the amp, or should I try different tubes. thanks in advance. 
Model T Reissue(sold)
74' Model T 1st Gen.
77' Model T 2nd Gen.
70's Concert Lead(sold)
70's Concert Bass(sold)
sunn Sonic II 60 watts(sold)
70's sunn 610L cab(sold)
412s cab
412 enclosure reissue
Sonic 2x10x1x18 cab

Offline Sledgeguitar

  • Full Member
  • ***
  • Posts: 26
Re: sunn model T reissue
« Reply #1 on: February 14, 2009, 07:08:42 am »
i just got a reissue myself. why can't i run my RAT2 distortion over the clean channel? it sounds very high pitched and puts out a lot of feedback?
good question about the clean vs gain. i have asked a lot of people with no response.

Offline django7866

  • Sr. Member
  • ****
  • Posts: 114
    • gatedoom
Re: sunn model T reissue
« Reply #2 on: February 17, 2009, 07:05:58 am »
yeah I also have a rat it's a vintage version and I have that same problem not that it's a bad thing but some times it's unnecessary. try running it through the gain channel and set the gain at 4/5 and try to use as little mid as possible that seems to help a little any.
 
Model T Reissue(sold)
74' Model T 1st Gen.
77' Model T 2nd Gen.
70's Concert Lead(sold)
70's Concert Bass(sold)
sunn Sonic II 60 watts(sold)
70's sunn 610L cab(sold)
412s cab
412 enclosure reissue
Sonic 2x10x1x18 cab