Sunn 610L 6 ohms with Reissue Model T 4, 8 or 16 ohms HELP

[EarthRumbles]

Hello, first post but long time reader. I am looking at picking up a Sunn 610L for a good price but Im not sure if I will be able to use it. I have a reissue Model T which has options for 4, 8 and 16 ohms but the cab runs at 6 ohms. I have heard that running the amp lower then the load for the cab is ok in this situation, but does anyone actually know? What series were these cabs for, 6 ohms just seems odd it makes sense with 4 ohm speakers but still a little odd. Right now Im using a 412L at 8 ohms, if possible I would like a way to use either one or both at the same time.  Any help would be great, I still may pick up the cab if I can find a way to use it in the future but I want to use it asap.

[Isaac]

Impedance is not exact. I think you'd be fine on either 4 or 8 ohms with the 610L.

[django7866]

You could use both. I used to have a reissue. I ran a 8 ohm 4x12 and a 610l at 6ohms. if you ran both it would be 3.42 ohms. So you could run both at the 4 ohms setting. Hope that helps.

[EarthRumbles]

So thats sweet but what if I wanted to use just the 6x10, anyway to do that without risk of damage to my amp. I mean Im not going to want to often but it would be nice to hear how just the 6x10 sounds. Ive used a 4x10 which I liked so Im thinking the 6x10 will be pretty bad ass. Looking forward to getting it next weekend. Thanks for the help out there.

[EarthRumbles]

Any advice on whether it would be better to set the head at 4 or 6 ohms?

[Isaac]

Any advice on whether it would be better to set the head at 4 or 6 ohms?

You have a head that can be set to 6 ohms?

[EarthRumbles]

Oops sorry about the misprint, I meant 4 or 8 Ohms. If I could set it to 6 I wouldn't have any issues. Thanks again