4x12 Build

[rot gut]

What kind of joint did you use on the 4x12?

[HRobert]

Just from observation, the joint look s ot be a butt joint with 3/4" plywood and then with a 1/2" facing strip around the perimeter of the cab front.

[rot gut]

I think you may be right.

[nattkua]

What kind of joint did you use on the 4x12?

I'm not sure I didn't really do any of the wood work a friend of mine did I just tolexed it and put the speakers in.

[nattkua]

Sorry another bad picture I keep forgetting my camera every time I got over to the practice space.

Any ways the top 4x12 is the one that my friend built me the bottom one is a Fender owned Sunn 4x12

[Addam]

What heads are running to what cabs?

[nattkua]

jcm 800 to the 4x12 and the jcm 2000 to the 6x12

[Addam]

Are there speakers in the new 4x12?  I can't really tell.  It doesn't look like it.  If so, are you going to be running the 800 in to both 4x12 and the 2000 in to the 6x12 or the 800 into one 4x12 and the 2000 into the 6x12?

[broiler]

Talk about a wall of doom! My ears ring just looking at it! Nice!

[nattkua]

The top 4x12 is the home made cab it's empty right now.
The Sunn 4x12 is loaded with celestion g12h

Right now I'm just running the 800 into the Sunn 4x12 and the 2000 into the 6x12 but I plan on running the 800 as a full stack once I get speakers for the top cab. This way when my band goes on tour this summer I can run the full rig or just two half stacks.