« previous next »
Pages: [1]   Go Down

Author Topic: Sunn Beta Lead problem  (Read 3183 times)

0 Members and 1 Guest are viewing this topic.

Offline chumbucket

  • Jr. Member
  • **
  • Posts: 2
Sunn Beta Lead problem
« on: December 05, 2010, 10:03:05 am »
I have a Beta Lead that has low output. Both preamps work but the amp is about as loud as conversational speech when cranked up. The outputs of both individual preamps work as well as the main power amp in. If I plug a separate preamp into the master return, I get full volume. Anybody run into this problem before?

THANKS!
 :evil:
Report to moderator   Logged

Offline george

  • Sr. Member
  • ****
  • Posts: 235
Re: Sunn Beta Lead problem
« Reply #1 on: December 06, 2010, 07:10:48 am »
Assuming you check the preamp channels seperately and if they are good I'm going to guess that you probably have a damaged output transistor(s).
Report to moderator   Logged

Offline mckinnon audio

  • Sr. Member
  • ****
  • Posts: 404
Re: Sunn Beta Lead problem
« Reply #2 on: December 06, 2010, 08:12:48 am »
  Hi there,sounds like the prob is between the pre out and the power amp in,as you can get the amp volume by going in the power amp in. Check any/all insert jacks,clean them with DeOxit,look for a bad connection on the pre out,good luck,Mel.
Report to moderator   Logged
Pages: [1]   Go Up
« previous next »