Author Topic: stupid question concerning slaving an amp  (Read 2609 times)

0 Members and 1 Guest are viewing this topic.

Offline theblob

  • Jr. Member
  • **
  • Posts: 9
stupid question concerning slaving an amp
« on: April 18, 2012, 08:06:04 pm »
The only question i have is can i run the preamp out line from a higher wattage head  into the poweramp in line on a lower wattage head? Pretty much a silverface concert lead into an solid state 80 watt fender head.I just don't want to cause any damage to either of them and i kind of remember someone saying you should not feed a higher powered head into a lower powered one,i tried to find the answer in search but couldn't, any help would be great thanks!

Offline EdBass

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,914
Re: stupid question concerning slaving an amp
« Reply #1 on: April 18, 2012, 08:59:42 pm »
The preamp out should be fine going into the power amp in. Whay you are doing is essentially replacing the poweramp on the Sunn with the poweramp on the Fender, or the peamp on the Fender with the preamp of the Sunn.

Offline theblob

  • Jr. Member
  • **
  • Posts: 9
Re: stupid question concerning slaving an amp
« Reply #2 on: April 18, 2012, 09:27:53 pm »
Ok sounds good, now i just have to build a 2x12 to go on top of the 6x12 and i am set,thanks for the help

Offline EdBass

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,914
Re: stupid question concerning slaving an amp
« Reply #3 on: April 18, 2012, 10:27:34 pm »
Are you planning to run both cabs from the Fender? If so watch your impedance between the cabs; for example if the 212 is the same impedance as the 612 the two 12's will be getting the same power as the six 12's in the other cabinet.

Offline theblob

  • Jr. Member
  • **
  • Posts: 9
Re: stupid question concerning slaving an amp
« Reply #4 on: April 19, 2012, 12:12:56 am »
no the concert lead will run the 6x12 and the fender will run the 2x12, thanks for the look out though