Author Topic: Schematic for Stinger 60?  (Read 6084 times)

0 Members and 1 Guest are viewing this topic.

Offline Krwkka

  • Jr. Member
  • **
  • Posts: 2
Schematic for Stinger 60?
« on: January 30, 2013, 01:58:36 pm »
I've just inherited a Sunn Stinger 60.  I'm quite surprised at the tone of this little monster  (in a good way!), but I want to recap it and maybe make a few tweaks while I'm in there. Does anybody know where I might find a schematic or service manual for this amp?

Thanks!

 

Offline loudthud

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,176
Re: Schematic for Stinger 60?
« Reply #1 on: February 16, 2013, 11:37:47 pm »
The attachment folder on this site is full.

I have posted the schematic for the Stinger 60 at this site: http://www.ampix.org/index.php .

I have no idea if you have to join to see files or how to find them. Look for a Sunn folder.
« Last Edit: February 18, 2013, 04:54:39 pm by loudthud »

Offline loudthud

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,176
Re: Schematic for Stinger 60?
« Reply #2 on: February 20, 2013, 02:34:20 pm »
Here is the schematic. The input stage is a JFET with a servo to set the operating point followed by an FMV type tone stack. Next are two CMOS gain stages and then Reverb and a power amp. The power amp has no short circuit or SOA protection.
« Last Edit: November 02, 2014, 07:08:36 pm by loudthud »

Offline imJonWain

  • Jr. Member
  • **
  • Posts: 2
  • Jet Rock!
Re: Schematic for Stinger 60?
« Reply #3 on: November 02, 2014, 12:26:07 pm »
Necro bump!  I'm looking for a Sunn Stinger 60 schematic and the file on ampix is down, anyone mind re-uploading it or sending it to me please? I promise I'll hang around here instead of lurking so much :)

Offline loudthud

  • Administrator
  • Hero Member
  • *****
  • Posts: 1,176
Re: Schematic for Stinger 60?
« Reply #4 on: November 02, 2014, 07:10:13 pm »
I have replaced the attachment and it should work now.

Offline imJonWain

  • Jr. Member
  • **
  • Posts: 2
  • Jet Rock!
Re: Schematic for Stinger 60?
« Reply #5 on: November 02, 2014, 07:42:03 pm »
thanks man!

Offline Krwkka

  • Jr. Member
  • **
  • Posts: 2
Re: Schematic for Stinger 60?
« Reply #6 on: April 10, 2015, 02:03:58 pm »
Whoa!  I never received a notice that you had posted the schem. THANK YOU!  I just went searching again and there it was.

Thank you thank you thank you, LoudThud!