Author Topic: Need help with Sunn Dymos Project! Ohmage etc.  (Read 2756 times)

0 Members and 1 Guest are viewing this topic.

Offline kasanovich

  • Jr. Member
  • **
  • Posts: 3
Need help with Sunn Dymos Project! Ohmage etc.
« on: May 18, 2008, 05:03:12 pm »
First post!

Recently bought an old Sunn Dymos 212 in rough condition, I'm going to make it my project to fix it up. It needs new speakers
but I don't know the ohmage of the amp. I can't seem to find any info on this amp online. There is markings inside the head with a signature of 1970.

If anyone knows, or could help me find out I would be most appreciative! I was thinking of getting Jensen Mod series speakers for it. if anyone has any reccomendations (don't have a ton of cash or I would get Celestion Vintage 30's) i'm more than open. I wish I could find the original grill cloth for it.

This is my second Sunn Amp, I have a Concert Lead head and at 200 watts- it kills.

thanks!

Offline basiklybass

  • Sr. Member
  • ****
  • Posts: 304
  • My Sunn's
    • The Old Days
Re: Need help with Sunn Dymos Project! Ohmage etc.
« Reply #1 on: May 21, 2008, 12:42:35 pm »
Many of the trasistor Sunns were designed for 4 ohms. I would think you would be fine using this.

I am not a fan of the Jensens. Didn't like them in the 60's and 70's and have the same opinion now. I have reconed 2 of them and was not impressed with the quality both of the design and of the sound. Many good speakers out there on Ebay for reasonable prices. Perhaps a pair of Celestion Modern 70? They seem to go for around $30.00 each, many times a bit under. I have seen alnico magnet 12"s in the $20 to $30 range and many ceramic ones as well. Even some Sunn labeled ones. Don't scrimp on the speakers, better to wait a couple of weeks and gather your funds than to purchase something that you are settling for. Also remember that many 12's need some time to sound good. A new speaker can sometimes take 20 to 39 ours to loosen up and reach it's full sound potential. Especially if they have paper surrounds.

Keep us posted.

Offline kasanovich

  • Jr. Member
  • **
  • Posts: 3
Re: Need help with Sunn Dymos Project! Ohmage etc.
« Reply #2 on: May 30, 2008, 08:43:20 am »
thanks for your advice basiklybass, i brought the schematics to an amp tech and it's rated at 8 ohms. My roomate has those jensens and i quite liked them, although I do have a Traynor 412 with Celestion Modern Leads which are great!

The guy who built my amp wrote his initials and the date inside the head in wax pencil 4/21/70! Sunn still kicking ass 38 years later.

I'll keep you posted and put up some pictures whenever it's finished (about a week or so). thanks again!