Author Topic: coliseum lead question  (Read 2557 times)

0 Members and 1 Guest are viewing this topic.

Offline cromag

  • Sr. Member
  • ****
  • Posts: 174
coliseum lead question
« on: September 12, 2011, 06:15:10 pm »
i have a coliseum lead.  at practice yesterday, it just died.  lost power.  i shut it down quickly.  i turned it off and on a few times.  nothing.  well, i left it in the on position while checking other things.  then, all of a sudden, it turned back on by itself.  sounded fine.  finished practice. 

any idea what could have happened?

Offline mckinnon audio

  • Sr. Member
  • ****
  • Posts: 404
Re: coliseum lead question
« Reply #1 on: September 13, 2011, 07:58:35 am »
  Hi there,sounds like you have an intermittant conncetion,could be a bad solder conn. Did the pilot light go out when there was no sound ? Check the on/off switch,might need to be cleaned,check the circuit breaker/fuse also known to go bad from being bumped,and check your AC cable and plug.Good luck,Mel.

Offline cromag

  • Sr. Member
  • ****
  • Posts: 174
Re: coliseum lead question
« Reply #2 on: September 13, 2011, 03:24:34 pm »
thanks for the info mel.  yes, the light did go out. i think i may take a peek inside and check for a bad solder joint and the plugs.  a very random thing indeed.

Offline george

  • Sr. Member
  • ****
  • Posts: 235
Re: coliseum lead question
« Reply #3 on: September 16, 2011, 01:41:07 pm »
You might check the mains cable with a DMM (DO NOT work on the amp connected to 120V mains) - I have found that the +30 year old mains cable connectors become intermittent.

Offline cromag

  • Sr. Member
  • ****
  • Posts: 174
Re: coliseum lead question
« Reply #4 on: September 23, 2011, 09:13:48 pm »
thanks for the tip.